Agpo Ferroli Optifor |from week 43 - 2001 | G3 Filters
Product description:
Agpo Ferroli Optifor |from week 43 - 2001 | G3
This wtw filter set is produced in-house by hq-filters.co.uk with the filter standard ISO 16890, which is equal to the original filters.
With our own production, we can offer high quality product alternatives at attractive prices.
This set consists of: 2 filters with velcro tape
Filter class: G3 - EN779:2012 | Iso coarse >80% - ISO 16890
Type: slip-in cover
Size: 200 x 375 mm.
Brand: hq-filters.co.uk
Agpo Ferroli no.: 3211020
You can easily replace the WTW filters for the Agpo Ferroli Combifor yourself and place them in your WTW unit.
With the purchase of these wtw filters, you bring fresh air from outside into your home. Good ventilation is important to maintain the indoor climate of the home, but also to ensure that dust, dirt, bacteria and mould cannot accumulate in the ventilation system.
Since 1 July 2018, the filter standard : EN799:2012 has been replaced by the filter standard : ISO16890
Here, filters are classified into so-called ePM categories.
This classification gives an accurate indication of which particle sizes are filtered out of the air.
PM1 stands for all types of particulate matter ('Particulate Matter') smaller than 1 micron (μ = one thousandth of a millimetre):
-
PM1: 1μ = 0.001 mm
-
PM2.5: 2.5μ = 0.0025 mm
-
PM10: 10μ = 0.01 mm
The 'e' for PM1 stands for 'efficiency' and indicates the efficiency of the air filter in capturing PM1.
Using these values, the standard now splits filters into four groups that filter different dust particles:
-
ISO Coarse < 50% (sand, lint, hair)
-
ISO ePM10 ≥ 50% (pollen, stone dust)
-
ISO ePM2.5 ≥ 50% (mould spores, toner dust)
-
ISO ePM1 (combustion particles, nanoparticles, viruses)
