Original Brink Flair 300 / 400 WTW Filters | Filter class G4 | Set of 2 filters
Brink Flair 300/400 | 532716 | G4|G4
Original Brink Flair filter set
This set consists: of 2 filters
The serial number of your appliance starts with 4290xxxxxxxx (Flair 300) or 4310xxxxxxxx (Flair 400)
Filter class: G4 - EN779:2012 | Iso coarse 60% - ISO 16890
Type: wire frame
Dimensions: 510 x 245 mm
Brand: Brink Climate systems
Brink no. 532716 - 535028 - 615799 (Flair 300), 615936 (Flair 400)
By purchasing these wtw filters, you bring fresh air from outside into your home. Good ventilation is important to maintain the indoor climate of the home properly, but also to ensure that dust, dirt, bacteria and mould cannot accumulate in the ventilation system.
Regular filter changes mean significant energy savings.
The filter standard : EN799:2012 has been replaced since 1 July 2018 by the filter standard : ISO16890
Here, filters are classified into so-called ePM categories.
This classification gives an accurate indication of which particle sizes are filtered out of the air.
PM1 stands for all types of particulate matter smaller than 1 micron (μ = one thousandth of a millimetre):
-
PM1: 1μ = 0.001 mm
-
PM2.5: 2.5μ = 0.0025 mm
-
PM10: 10μ = 0.01 mm
The 'e' for PM1 stands for 'efficiency' and indicates the efficiency of the air filter in capturing PM1.
Using these values, the standard now splits filters into four groups that filter different dust particles:
-
ISO Coarse < 50% (sand, lint, hair)
-
ISO ePM10 ≥ 50% (pollen, stone dust)
-
ISO ePM2.5 ≥ 50% (mould spores, toner dust)
-
ISO ePM1 (combustion particles, nanoparticles, viruses)
For questions, suggestions or special filter requests, call 0513-648364 or email [email protected]
You can easily replace the WTW filters for the Brink Flair yourself and install them in your WTW unit
