Brink Renovent HR 250/325 medium large | with bypass | 531286
Brink Renovent HR 250/325 Medium Large + Bypass WTW Filter Set
Main points
| Feature | Details |
|---|---|
| Brand | HQ-Filters.co.uk |
| Dimensions | 500 x 237 mm |
| Filter class | G3 - EN779:2012 / ISO Coarse 50% - ISO 16890 |
| Type | Wire frame |
| Suitable for | Renovent HR (CF), Renovent HR Medium, Renovent HR Large with bypass cartridge |
| Brink Number | 535002 - 531286 |
Why a heat recovery filter is essential for your ventilation system
A heat recovery (CHW) unit helps maintain a healthy indoor climate by drawing fresh air in from outside and extracting used air. A properly functioning WTW filter prevents accumulation of dust, dirt, bacteria and mould in the ventilation system.
What is included in this WTW filter set?
-
2 filters
-
Packed per set
-
Dimensions: 500 x 237 mm
Compatibility and suitability
This filter is compatible with various Brink Renovent HR models, including:
-
Renovent HR (CF)
-
Renovent HR Medium
-
Renovent HR Large with bypass cartridge
Always check the dimensions of your existing filters before purchasing a new set. In doubt? Please contact our customer service.
Why choose HQ-Filters.co.uk?
HQ-Filters.co.uk produces these filters according to the ISO 16890 standard, which means they meet the same requirements as the original Brink filters. As a result, you benefit from high-quality alternatives at an economical price.
What does ISO 16890 mean for WTW filters?
Since 1 July 2018, the filter standard EN779:2012 has been replaced by ISO 16890. This means that filters are now classified according to their efficiency in filtering specific particles:
-
ISO Coarse < 50%: Large dust particles such as sand, hair and lint
-
ISO ePM10 ≥ 50%: Pollen and coarse dust
-
ISO ePM2.5 ≥ 50%: Mold spores and toner dust
-
ISO ePM1: Nanoparticles, viruses and soot
How often should you replace CHW filters?
For optimal operation of your WTW unit, it is recommended to change the filters:
-
Replace every 6 months
-
Check regularly for contamination
Changing your WTW filter yourself: step-by-step guide
-
Switch off the WTW unit before removing the filters.
-
Open the filter compartment of your WTW unit.
-
Remove the old filters and compare the dimensions with the new filters.
-
Insert the new filters correctly into the holder.
-
Close the compartment and switch on the unit again.
The benefits of a clean CHW filter
-
Better indoor air quality
-
Energy savings through more efficient ventilation
-
Less dust and allergens in the air
-
Longer life span of the HR unit
Prefer original filters?
Do you prefer original Brink filters? No problem! View the original filters with price guarantee here.
Frequently asked questions about CHW filters
1. How do I know if my CHW filter needs replacing?
If you notice that the air quality in your home is deteriorating, or if your WTW unit is making more noise than usual, it's time to check your filters.
2. Are HQ-Filters as good as original Brink filters?
Yes, HQ-Filters meet the same quality standards as original Brink filters and are produced according to ISO 16890.
3. Can I clean my WTW filter instead of replacing it?
It is not recommended to clean WTW filters. This can damage the filter structure and reduce effectiveness.
4. How many filters do I need for my WTW unit?
This set contains two filters, which is sufficient for most Brink Renovent HR 250/325 models.
5. Where can I buy WTW filters?
You can order this filter set directly from the WTW Filtershop.
Order your WTW filter today and enjoy clean air in your home!
