Orcon HRC 300/400 EcoMax/MaxComfort | Filter set G4/F7
Orcon HRC 300/400 EcoMax/MaxComfort Filter Set G4/F7 - Everything you need to know
Main points
| Feature | Specification |
|---|---|
| Filter type | ISO Coarse 70% (G4) & ePM1 60% (F7) |
| Dimensions | 185 x 560 x 23 mm |
| Classification | G4 (coarse) and F7 (fine) |
| Replaceability | Easy to replace yourself |
| Compatibility | Suitable for Orcon HRC 300/400 EcoMax/MaxComfort |
| Article number | 22700006 |
What is the Orcon HRC 300/400 EcoMax/MaxComfort filter set?
The Orcon HRC 300/400 filter set consists of two filters: a G4 filter for coarse dust and an F7 filter for fine dust. These filters are specially designed for Orcon ventilation systems and ensure optimum air quality in the home.
How does the filter system work?
-
G4 filter (coarse 70%): removes at least 70% of particles larger than 10 microns, such as dust and pollen.
-
F7 filter (ePM1 60%): Filters out at least 60% of particles between 0.3 and 1 micron, such as fine dust and bacteria.
Why is filtration important?
If we breathe in polluted air, we may suffer from allergies or respiratory problems. These filters help:
-
Reduce fine dust, pollen and mould.
-
Extend the life of your heat exchanger unit.
-
Improve indoor air quality.
What is the difference between G4 and F7 filters?
| Filter type | Particle filtering |
| G4 (ISO Coarse 70%) | Coarse dust, hairs, pollen, sand |
| F7 (ePM1 60%) | Fine dust, bacteria, smoke particles |
How often should you change the filters?
The recommended replacement frequency is every 6 to 12 months, depending on:
-
The air quality in your environment.
-
How often your ventilation system runs.
-
The level of indoor pollution.
How do you replace Orcon WTW filters?
-
Turn off the WTW unit.
-
Open the filter compartment.
-
Carefully remove the old filters.
-
Insert the new filters in the correct direction.
-
Close the compartment and turn the unit back on.
Where to buy the right filters?
The Orcon HRC 300/400 filter set is easy to order via WTW Filtershop.
Frequently asked questions
1. How do I know when my filter needs to be replaced?
If you notice that the air quality deteriorates or your ventilation system has to work harder, it is time to change your filter.
2. Can I clean and re-use the filter?
No, these filters are not reusable. They are designed for single use and must be replaced once they become saturated.
3. Will this filter set fit in other heat recovery units?
This set is specifically designed for Orcon HRC 300/400 models and may not fit other units.
By choosing the right filters, you will ensure a cleaner and healthier living environment. Order your Orcon HRC 300/400 EcoMax/MaxComfort filter set today and enjoy fresh air in your home!
