Replacement filter set Tecalor supply air F7, LTM dezent 600/800/900 FMS F7-2

Replacement filter set Tecalor supply air F7, LTM dezent 600/800/900 FMS F7-2

This filter set is produced in-house by hq-filters.nl with the filter standard ISO 16890, which is equal to the original filters.
With our own production we can offer alternative products at attractive prices.

This set consists of: 2 filters

Medium: Synthetic / Z-Line / in steel frame

F7 EN799:2012 -  ePM10 75% - ISO 16890

Dimensions 400 x 450 x 96 mm.

Brand: HQ filters

Tecalor no. :  237665 - FMS F7-2

With the purchase of these heat recovery filters you bring fresh air from the outside in. Good ventilation is important to maintain the indoor climate of the home, but also to ensure that substances, dirt, bacteria and fungi cannot build up in the ventilation system.
Regular filter changes mean significant energy savings.

The filter standard: EN799:2012  has been replaced by the filter standard: ISO16890 sinds since 1 July 2018
The filters are classified in so-called ePM categories.
This classification gives an accurate indication of which particle sizes are filtered out of the air.

PM1 stands for all types of particulate matter ('ParticulateMatter') that are smaller than 1 micron (μ = one thousandth of a millimeter):
PM1: 1μ = 0.001mm
PM2.5: 2.5μ = 0.0025mm
PM10: 10μ = 0.01mm
The 'e' for PM1 stands for 'efficiency' and indicates the efficiency of the air filter in capturing PM1.

Based on these values, the standard now divides filters into four groups that filter different dust particles:
ISOCoarse< 50% (sand, fluff, hair)
ISO ePM10 ≥ 50% (pollen, rock dust)
ISO ePM2.5 ≥ 50% (mold spores, toner dust)
ISO ePM1 (combustion particles, nanoparticles, viruses)

For questions, suggestions or special filter requests, call 0513-648364 or send an email to [email protected]