Wolf CGL 500/600/800 (Exhaust air) - M5 filter
Wolf CGL 500/600/800 (Exhaust air) - M5 filter
With its spacer technology, this hq power filter for your Wolf CGL 500/600/800 is an upgrade of the standard M5 filter and offers the best protection against fine dust and pollen in your home.
The filter material is polyester, which ensures the physical durability of the filter even in places with humid air.
Because this filter features filter media efficiency and aerodynamics for better filtration performance, you create the best indoor climate for you and your family.
This mini pleat media is mounted in a hardened waterproof cardboard frame with extra narrow edges for even greater filter surface area and lower resistance, so less energy is needed.
The hq power filter is mounted on the fresh air supply in your Wolf CGL 500/600/800
We recommend inspecting your filter every three months and replacing the filter at least every six months, also to reduce contamination of the air ducts. Dirty air ducts are a breeding ground for mould and bacteria.
In addition to using these filters, we recommend using the Protec spray regularly.
In addition to using these filters, we recommend using the Protec spray regularly.
This set consists of: 1 filter
Filter class: M5- EN779:2012 | Coarse 90% - ISO 16890
Type: synthetic / compact filter
DIMENSIONS: 372 x 393 x 96 mm.
Brand: hq filters
Wolf no:
By purchasing these wtw filters, you bring fresh air from outside into your home. Good ventilation is important to maintain the indoor climate of the home properly, but also to ensure that dust, dirt, bacteria and mould cannot accumulate in the ventilation system.
Regular filter changes mean significant energy savings.m
The filter standard : EN799:2012 has been replaced since 1 July 2018 by the filter standard : ISO16890
Here, filters are classified into so-called ePM categories.
This classification gives an accurate indication of which particle sizes are filtered out of the air.
PM1 stands for all types of particulate matter ('Particulate Matter') smaller than 1 micron (μ = one thousandth of a millimetre):
-
PM1: 1μ = 0.001 mm
-
PM2.5: 2.5μ = 0.0025 mm
-
PM10: 10μ = 0.01 mm
The 'e' for PM1 stands for 'efficiency' and indicates the efficiency of the air filter in capturing PM1.
Using these values, the standard now splits filters into four groups that filter different dust particles:
-
ISO Coarse < 50% (sand, lint, hair)
-
ISO ePM10 ≥ 50% (pollen, stone dust)
-
ISO ePM2.5 ≥ 50% (mould spores, toner dust)
-
ISO ePM1 (combustion particles, nanoparticles, viruses)
For questions, suggestions or special filter requests, call 0513-648364 or email [email protected]
